Main Campus   |  Enka Campus  |  Madison Campus  |  Virtual Campus   

Asheville-Buncombe Technical Community College

Academic Learning CenterDevelopmental StudiesDistance LearningHolly LibraryService Learning |  Learning Resources Division

General Syllabus
MAT 060 – Essential Mathematics

Please refer to the class instructor's syllabus addendum for class assignments, test make-up policy, specific evaluation weights, and other class specific information.

Prerequisite(s): MAT 050 or placement
Corequisites: RED 080 or placement

Credit Hours: 4.0
Contact Hours: 5.0
Lab Hours: 2.0

Required Text:  Martin-Gay, Basic College Mathematics, 2nd Edition

Materials:  Scientific Calculator (Sharp EL 531L). (Must have a fraction key.)

Goal:

This course is a comprehensive study of mathematical skills which should provide a strong mathematical foundation to pursue further study.  Topics include principles and applications of decimals, fractions, percents, ratio and proportion, order of operations, geometry, measurement, and elements of algebra and statistics.  Upon completion, students should be able to perform basic computations and solve relevant, multi-step mathematical problems using technology where appropriate.  The operation of a scientific calculator is an essential part of the instructional methodology, and all students are expected to have one.

Intended Learning Outcomes

Upon successful completion of the course, you will be able to:

  1. Add, subtract, multiply and divide fractions, decimals and signed numbers using order of operations.

  2. Evaluate powers and roots.

  3. Convert between fractions, decimals and percents.

  4. Express ratios and solve proportions.

  5. Solve percent problems using the percent equation or the proportion method.

  6. Use unit analysis within and between the US and metric systems.

  7. Describe and define lines, angles and basic geometric figures.

  8. Calculate the perimeter, area and volume of basic geometric figures.

  9. Apply the Pythagorean Theorem.
  10. Solve simple linear equations in the form ax + b = c.
  11. Determine mean, median and mode and interpret and produce basic statistical graphs.

Reinforcement Experiences

This course provides reinforcement experiences for the following General Education objectives.
  1. Communicate effectively in speaking, writing, reading and/or listening.
  2. Locate, evaluate, and use information to analyze problems and make logical decisions.
  3. Apply math skills and/or natural science knowledge appropriately to organize, analyze and make information useful.
  4. Demonstrate basic competency in computer technology.
  5. Demonstrate the ability to succeed as a self-directed learner.

Cross-Curriculum Competencies:

Course-Specific Objective

Associated Learning Activity

Means of Assessment (Direct)

Means of Assessment (Indirect)

Means of Evaluation

GenEd Reinforcement Experiences

Add, subtract, multiply and divide fractions, decimals and signed numbers using order of operations. Lecture

Board demonstrations

Class discussions

Homework

Lab

Homework assignments

Lab reports

Tests

Comprehensive final exam

Class participation

Group participation

 

College grading scale for tests, homework assignments, labs and/or projects, and final exam

1,2,3,4,6

Evaluate powers and roots.

Lecture

Board demonstrations

Class discussions

Homework

Lab

Homework assignments

Lab reports

Tests

Comprehensive final exam

Class participation

Group participation

 

College grading scale for tests, homework assignments, labs and/or projects, and final exam

1,2,3,4,6

Convert between fractions, decimals and percents

Lecture

Board demonstrations

Class discussions

Homework

Lab

Homework assignments

Lab reports

Tests

Comprehensive final exam

Class participation

Group participation

 

College grading scale for tests, homework assignments, labs and/or projects, and final exam

1,2,3,4,6

Express ratios and solve proportions

Lecture

Board demonstrations

Class discussions

Homework

Lab

Homework assignments

Lab reports

Tests

Comprehensive final exam

Class participation

Group participation

 

College grading scale for tests, homework assignments, labs and/or projects, and final exam

1,2,3,4,6

Solve percent problems using the percent equation or the proportion method

Lecture

Board demonstrations

Class discussions

Homework

Lab

Homework assignments

Lab reports

Tests

Comprehensive final exam

Class participation

Group participation

 

College grading scale for tests, homework assignments, labs and/or projects, and final exam

1,2,3,4,6

Use unit analysis within and between the US and metric systems

Lecture

Board demonstrations

Class discussions

Homework

Lab

Homework assignments

Lab reports

Tests

Comprehensive final exam

Class participation

Group participation

 

College grading scale for tests, homework assignments, labs and/or projects, and final exam

1,2,3,4,6

Describe and define lines, angles and basic geometric figures

Lecture

Board demonstrations

Class discussions

Homework

Lab

Homework assignments

Lab reports

Tests

Comprehensive final exam

Class participation

Group participation

 

College grading scale for tests, homework assignments, labs and/or projects, and final exam

1,2,3,4,6

Calculate the perimeter, area and volume of basic geometric figures

Lecture

Board demonstrations

Class discussions

Homework

Lab

Homework assignments

Lab reports

Tests

Comprehensive final exam

Class participation

Group participation

 

College grading scale for tests, homework assignments, labs and/or projects, and final exam

1,2,3,4,6

Apply the Pythagorean Theorem

Lecture

Board demonstrations

Class discussions

Homework

Lab

 

Homework assignments

Lab reports

Tests

Comprehensive final exam

Class participation

Group participation

 

College grading scale for tests, homework assignments, labs and/or projects, and final exam

1,2,3,4,6

Solve simple linear equations in the form ax + b = c

Lecture

Board demonstrations

Class discussions

Homework

Lab

 

Homework assignments

Lab reports

Tests

Comprehensive final exam

Class participation

Group participation

 

College grading scale for tests, homework assignments, labs and/or projects, and final exam

1,2,3,4,6

Determine mean, median and mode and interpret and produce basic statistical graphs

Lecture

Board demonstrations

Class discussions

Homework

Lab

 

Homework assignments

Lab reports

Tests

Comprehensive final exam

Class participation

Group participation

 

College grading scale for tests, homework assignments, labs and/or projects, and final exam

1,2,3,4,6

Assessment and Evaluation:

Grades will be awarded based on a modified 10 point scale: 90% - 100% = A, 80%-89% = B, 70%-79% = C, less than 70% = F, using weighted averaging.  This is a developmental course and the minimum passing grade is "C."  In order to successfully complete this developmental course, students must make a minimum of 50% on the final exam as well as attain a 70% or higher average for the course using the following weights.

Chapter Quizzes
Activities
Lab Reports
Homework assignments

70%

Final Exam

30%

The final exam, worth 30% of the final grade, will be comprehensive, covering all material included in class sessions and assignments.

Class Attendance

Regular and punctual class attendance is expected of all students for them to achieve their potential in class and to develop desirable personal traits necessary to succeed in employment. Instructional time missed is a serious deterrent to learning. Students are responsible for fulfilling the requirements of the course by attending and completing course assignments. An accurate record of class attendance will be kept.

If instructional time is missed for excusable reasons, the student will be permitted to make up work to the extent possible. Because of the nature of some learning experiences, especially clinics, labs and shops, it is difficult, if not impossible to duplicate the work of the class. In some courses, absence or tardiness of an individual may be a major disruption to the performance of others in the class or an inconvenience to other organizations such as hospitals and clinics. The faculty may develop guidelines for advance notice of absences, makeup of work, etc. Students will be informed of guidelines at the beginning of the course.

To receive course credit, a student should attend a minimum of 80% of the contact hours of the class. Upon accumulating absences exceeding 20% of the course contact hours, the student may be dropped from the class and will be awarded a grade of "U," unless the student follows the official withdrawal procedure before the grade of "U" is recorded. A tardy is defined as arriving late for class, leaving early, or being away from class without permission during class hours. Three tardies may constitute one absence.

It is the joint responsibility of the student and instructor to discuss attendance patterns that will endanger the success of the student in the course. If it appears that a student will not be able to complete a course successfully, the instructor may advise the student to withdraw no later than the official withdrawal date at the 75% point of the class.

Inclement Weather Schedule

The College will close when weather conditions are such that driving is hazardous.

The following procedure will be observed for inclement weather conditions:

  1. Announcements concerning school operation will be made by 6:30 am on local radio and TV stations for day classes. A voice mail message will be recorded on the switchboard. If it appears that ice or snow may be cleared by mid-morning, the schedule below will be followed and all College personnel and students should report by 10am.

Normal Class Time

Delayed Opening

8 a.m. 10-10:40 a.m.
8:30 a.m. 10:20-11 a.m.
9 a.m. 10:45-11:25 a.m.
9:30 a.m. 11:05-11:45 a.m.
10 a.m. 11:30am-12:10 p.m.
10:30 a.m. 11:50am-12:30 p.m.
11 a.m. 12:15-12:55 p.m.
11:30 a.m. 12:35-1:15 p.m.
12 p.m. 1-1:40 p.m.
12:30 p.m. 1:20-2 p.m.
1 p.m. 1:45-2:25 p.m.
1:30 p.m. 2:05-2:45 p.m.
2 p.m. 2:30-3:10 p.m.
2:30 p.m. 2:50-3:30 p.m.
3 p.m. 3:15-3:55 p.m.
3:30 p.m. 3:35-4:15 p.m.
4 p.m. 4 p.m.

Important: If weather conditions become worse after the 6:30am announcement, an additional announcement closing school for the day will be made no later than 8:30am.

  1. Closing or delaying the day programs does not automatically close evening classes. Announcements will be made on radio stations and the College switchboard no later than 3pm concerning the evening classes.
  2. When weather conditions dictate early dismissal of the day or evening classes, the announcement will be made by telephone to each building on campus.
  3. Commuters should exercise personal judgment concerning highway conditions regardless of College announcements, particularly those commuting from outlying areas.
  4. Adjustments in the College calendar for days missed because of inclement weather will be made at the end of the semester.
  5. Oak Student Center will open at 8am for early arrivals.

Activity Day Schedule

This schedule will be used for most approved and announced student activities.

Normal Class Time

Activity Day Schedule

8:00 am

8:00-8:40 am

8:30 am

8:20-9:00 am

9:00 am

8:45-9:25 am

9:30 am

9:05-9:45 am

10:00 am

9:30-10:10 am

10:30 am

9:50-10:30 am

11:00 am

10:15-10:55 am

11:30 am

10:35-11:00 am*

11:00 am-1:00 pm Free for activities !

12:00 noon

1:00-1:40 pm

12:30 pm

1:20-2:00 pm

1:00 pm

1:45-2:25 pm

1:30 pm

2:05-2:45 pm

2:00 pm

2:30-3:10 pm

2:30 pm

2:50-3:30pm

3:00 pm

3:15-3:55 pm

3:30 pm

3:35-4:15pm

4:00 pm

4:00 pm

* 25 minute period

Code of Class Room Conduct

Asheville-Buncombe Technical Community College is an institution for adult learning. It is a partnership between instructors with the desire to teach and students with the desire to learn. In order to create an appropriate environment for teaching and learning to flourish, there must be respect for the instructor and fellow students. Listed below are guidelines for classroom behavior which the College has established to ensure that the learning environment is not compromised.

  1. Attendance: You are expected to be in class the entire class time. Do not enter late or leave early. Rare exceptions may be excused, particularly under emergency circumstances, but you should be prepared to explain your tardiness to the instructor after class. Likewise, the need to leave early should be explained to the instructor before class.
  2. Absences: Inform the instructor in advance, if you know you are going to miss a class. Also, take responsibility for getting missed assignments from other students. Do not expect that you will be allowed to make up work, such as unannounced quizzes or tests, after an absence. Instructors are not responsible for re-teaching the material you missed because of absence.
  3. Conversation: Do not carry on side conversations in class.
  4. Other Activities: You may not work on other activities while in class. This includes homework for other courses or other personal activities.
  5. Internet: In classes where Internet access is provided, you may use the Internet for valid, academic purposes only. You may not use it for open access to other non-academic sites which are unrelated to the course.
  6. Sleep: Do not sleep in class.
  7. Attitude: You are expected to maintain a civil attitude in class. You may not use inappropriate or offensive commentary or body language to show your attitude regarding the course, the instructor, assignments, or fellow students.
  8. Profanity and Offensive Language: You may not use profanity or offensive language in class.
  9. Cell phones and beepers: You may not receive or send telephone calls or pages during class. You are responsible for turning off cell phones and beepers upon entering class.
  10. Guests: You may not bring unregistered friends or children to class.
  11. Food, Drink, Tobacco Products: You may not have food or drink in class. You may not use tobacco products in the buildings of A-B Tech.
  12. Personal Business: You may need to transact personal business with the instructor, asking him or her to sign forms. Plan to do this before instruction begins or after class.
Typically, violations of the Code of Classroom Conduct will be dealt with as minor infractions. However, repetition of minor infractions or other more serious violations of the Code of Student Conduct may lead to removal from the classroom while the matter is resolved and referral to the Vice President for Student Services for disciplinary action.

Academic Dishonesty

You may not deceive any official of the college by cheating on any assignment, exam, or paper. This includes plagiarism, which is the intentional theft or unacknowledged use of another’s words or ideas. Plagiarism includes (but is not limited to) paraphrasing or summarizing another’s words or works without proper acknowledgement, using direct quotes of material without proper acknowledgement, or purchasing or using a paper or presentation written or produced by another. The faculty at A-B Tech may also consider presenting as original work a paper written for one class to satisfy a requirement in another class to be academic dishonesty.

Students with Special Needs 

If you are a student with a disability and want to request academic accommodations (i.e., a notetaker, extended time on tests, or alternate testing), you must register with the Disability Services Office in the Azalea Building or by making an appointment by calling 254-1921 ext.141 or by email at Aclingenpeel@abtech.edu.  This is the campus office responsible for reviewing documentation provided by students requesting academic accommodations, and for accommodations planning in cooperation with students and instructors, as needed and is consistent with course requirements.

A-B Tech, the community's College, is dedicated to student success. 

Divider Bar

Departments

Academic Learning CenterDevelopmental StudiesDistance LearningHolly LibraryService Learning

Divider Bar

A-B Tech Logo and link